老太婆一级黄色片,亚洲国产成人av在线观看,天天干天天干天天干天天干天天干

Three technical characteristics of IMPRESIND gas radiant heating system

time：2024-08-30
hits：1123次
source：正弘奧能

Due to the large area of the tall space industrial plant, the poor heating property of the steel structure plant, the environment is more transparent, which determines its heating difficulties, and even if the appropriate heating method is found, the cost of heating is also an important issue for users to consider. Therefore, it is a great challenge in the heating design of tall space industrial plants. 
 

	With the development of science and technology, gas radiation heating equipment has overcome this problem. The height of the factory workshop is generally about 10 meters, and even up to 20 meters or more. The traditional convection heating principle is to heat the air first, and then heat the heat to the human body after the air in the whole room is heated. The infrared radiation heat emitted by the gas radiation heating equipment is to directly heat the human body or equipment, and then heat the air through the secondary radiation such as the human body or equipment. The heat distribution is uniform and the heating is rapid, which is very suitable for heating of tall space plants, and can achieve different temperature requirements in different areas of the same plant. This not only saves the cost of equipment, but also greatly saves the cost of use.


	 


	<img src="http://www.soooyo.cn/Uploads/image/20240830/20240830175140_76420.jpg" alt="" />

 
IMPRESIND gas radiation heating equipment promoted and sold by Beijing Leadway Power&nbsp;Co., Ltd. uses natural gas and liquefied petroleum gas as fuel, and the heating generator is installed outside the building, which will not increase the fire rating of the building; The radiation tube is installed on the top of the tall space, and the heat energy is transferred directly from the top to the indoor ground, objects and personnel, and the heat is transferred in a directional manner, and the heating effect is better. Therefore, the system can be widely used in industrial plants, hangars, maintenance warehouses, warehouses, gymnasiums and other tall space places. 
 
1) aluminum-impregnated steel radiation tube technology 
The radiation tube is made of double-sided aluminized black gray alloy steel. Heat treatment at high temperature under strict control of temperature and humidity (black and gray surface is not coated or painted). No paint discoloration, no distortion, higher thermal radiation efficiency; Corrosion resistance, oxidation resistance, ensure service life. 
 
2) Energy saving technology of gas radiant heating system 
After the heat exchange of the hot fluid inside the radiation tube is finished, part of the product will be used for flue gas recirculation through the premix chamber, greatly improving the heating efficiency and making full use of energy. And the other part is directly discharged to the outside. Two heating to achieve the purpose of energy saving, environmental protection, reduce operating costs, comprehensive energy saving up to 30%~50%. 
 
3) Intelligent control technology of gas radiant heating system 
Can achieve independent control or centralized remote control. The LCD centralized control box can control up to 59 groups of devices, and can be connected to the computer to display the use of each device and related parameters one by one. Automatic control and temperature regulation are convenient and can realize partition and time-sharing temperature control. At the same time, it has automatic opening and closing function on time. 
 
According to GB50019-2015 Design Code for Heating, Ventilation and air conditioning of industrial buildings 5.5.4: When gas infrared radiation heating is used, the calculated indoor temperature should be 2℃ ~ 3℃ lower than the air temperature in the convective heating room. Under the premise of achieving the same heating effect, the heat load is lower, the comfort is higher, and the energy saving is more.

小峰色戒网站_大奶一区_久久久国产毛片_欧美成人V片观看_国产一级片久久_久久久久1

Three technical characteristics of IMPRESIND gas radiant heating system