色伦专区97中文字幕,久久久久青草线蕉亚洲,free国产毛片一区二区

Advantages of hot water infrared radiation heating equipment for industrial plants in large space

time：2023-05-05
hits：2050次
source：正弘奧能

Infrared hot water radiation panel, as a heating method for large space industrial workshops, was widely used in the early years of our country, but because of the production of steel pipes, serious corrosion phenomenon, later abandoned. In recent years, with the entry of foreign enterprises, they also introduce their infrared hot water radiant panel heating method into China, and the use effect is good. So: radiant panel heating is a mature technology. 
 
Infrared hot water radiation plate converts heat into infrared radiation through the surface radiation coating. Because the radiation heat can directly penetrate the air, it is absorbed by buildings, human bodies, equipment and other objects, and is converted into heat energy. The air temperature in the building will not produce severe vertical imbalance. Therefore, it has a high utilization rate of heat energy and makes the human body feel comfortable. Therefore, infrared hot water radiation heating is an ideal heating method for industrial buildings in Gaoda space. 
 
Advantages of infrared hot water radiant panel 
 
Infrared hot water radiation plate has the advantages of simple and light structure, high thermal efficiency, convenient installation, low initial investment and operating costs, simple operation, high intelligence, no noise, environmental protection and clean. 
 
 
1. Save energy 
It is 2-3 degrees lower than the traditional heating system, but it is equally comfortable. Walls and floors are heated to allow secondary heat dissipation into the room. 
 
2. Low operating cost 
Hot water radiant panels have no moving parts and are almost maintenance free. 
 
3. Uniform temperature distribution 
No temperature spikes are felt below the hot water radiant plate. 
 
4. Spatial gain 
Hot water radiant panel heating system installed on the roof, does not occupy the ground and walls, can make full use of the ground and walls. 
 
5. Comfortable and healthy 
Hot water radiant panel heating without blowing, will not cause dust flying. 
 
6. No noise 
The hot water radiant panel heating system operates very quietly. 
 
7. safe and reliable 
There is no requirement on fire rating for the use of hot water radiant panel. It can be used in any environment without corrosive gas. 
 
 
Application of infrared hot water radiant plate 
 

	Hot water radiant panel is widely used in industrial workshops, warehouses, aircraft repair warehouses, large stadiums, exhibition halls and other tall space places.


	 


	<img src="/Uploads/image/20230506/20230506143146_38797.jpg" alt="" /> 

 

	The hot water radiant panel promoted by Beijing Leadway Power&nbsp;Co., Ltd. adopts an innovative design concept. The pipe, as the warmest part of the panel, is completely downward, and 70% of its surface is wrapped by metal plate (wrapping Angle exceeds 280°), which increases the heat transfer area and ensures the heat transfer from the tube to the plate.


	 


	The hot water radiation belt is prefabricated in the factory into a standard length of 3 meters, 6 meters (2 meters, 4 meters for special requirements). Each radiant panel can be connected by quick joint or welding. Each panel and collector is prefabricated and safety tested at the plant. The support of the suspension plate is welded together with the radiant plate, one per meter, greatly ensuring the flexibility of installation.

小峰色戒网站_大奶一区_久久久国产毛片_欧美成人V片观看_国产一级片久久_久久久久1

Advantages of hot water infrared radiation heating equipment for industrial plants in large space